Original price was: $44.00.$40.00Current price is: $40.00.
Prokut chain loop 3/8 LP .043, 044 drive links.
Only 2 left in stock - Available For Click & Collect
Description
🔧 Compatibility Overview
This chain is designed for small to mid-size chainsaws (up to ~42cc) running a:
- Bar length: 12″ (30cm)
- Pitch: 3/8″ Low Profile (LP)
- Gauge: .043″
- Drive links: 44
It is commonly used as a narrow-cut / low-kickback chain for lighter saws, pole saws, and pruning saws.
🪚 Compatible Chainsaw Brands & Models
STIHL
Fits many older and small homeowner/pro saws when fitted with correct bar:
- MS162 Mini Boss
- MS 190 T / MS 191 / MS 192 / MS 193 / MS 194 Arborist Chainsaws
- MS 200 / MS 200 T
- MS 201 / MS 201 TC & TCM variants (2022 Models to Present) < 2022 DOM use 3/8 .050 Gauge Chain
- MSE electric series (MSE 140,MSE 141 MSE 170, MSE 180, MSE 200, etc.)
- MSA190T, MSA220T 36V Chainsaws
- Older models: 009, 010, 011, 017, 018, 019, 020, 021, 023 etc.
- STIHL HT pole pruners (HT 70, HT 75, HT 100, HT 101, HT 130, HT 131, HT-KM) (check bar spec carefully as models > 2018 take 1/4P .043 x 64 DL)
- OEM (3610 000 0044 / 36100000044 / 3699 000 0044 / 36990000044)
ECHO (Power Pruners & Pole Saws)
- PPF-210 / 211 / 225 / 280
- PPT-230 / 231 / 260 / 261 / 265 / 265H / 265S / 266 / 280
- PPT-2100 / PPT-2400
- PP300 / PP400 / PP600 / PP800 / PP1200 / PP1250 / PP1400 series
McCulloch
- 110, 115, 120, 130, 140
- 155, 160, 165, 175, 320, 340, 355, 3800 series
- Eager Beaver series (2010–2318 range)
- Mini Mac / Mac series (various models)
Ryobi
- CS184 (electric)
- CS214 (electric)
- CS3516 / CS3816 / CS3818
- Selected hedge/pole variants
Shindaiwa
- M242 / M254
- P230 / P231
- Pruner attachments (#78701 / #65002)
RedMax / Zenoah
- GZ25N
- PSZ 2500S / PSZ 2600
Oleo-Mac / Efco (selected models)
- 240, 241, 244
- 931, 935
- Various pole saw / pruning units
MTD / Talon / Others
- MTD 3414, 3616, 3816
- Talon AC2103C, AC211114, AC31 series
- Various small electric & homeowner saws
⚠️ Important Notes (Very Important)
This chain ONLY fits if ALL of these match:
- 3/8″ Low Profile pitch
- .043″ gauge bar groove
- 44 drive links
- ~12″ guide bar length (can vary slightly depending on bar design)
Also:
- Some listed saws can take .050 gauge or .325 pitch instead, so you must physically confirm your bar marking.